T-1050-4 Multi-Head Vertical Machining Center
This machining center has a 1500×500mm cast iron T-slot workbench (max load 600Kg), X/Y/Z travels 410/450/260mm. Spindle: 3.7/5.5Kw, 20000rpm, Φ100mm, pneumatic-hydraulic tool change (BT30). X/Y/Z positioning accuracy 0.005mm, repeat 0.004mm. 21T×3 chain servo tool magazine. With network transmission, monitoring, tool setter.
Specifications
|
Name |
Item |
Parameter |
|
Worktable |
Worktable Size (mm) |
1500*500 |
|
Distance from Worktable to Spindle Nose (mm) |
190 ～ 450 |
|
|
Spindle Center Distance (mm) |
350 |
|
|
Maximum Load Capacity (Kg) |
600 |
|
|
Cast Iron T-Slot Worktable |
6-12*80 |
|
|
Travel |
X-axis Travel (mm) |
410 |
|
Y-axis Travel (mm) |
450 |
|
|
Z-axis Travel (mm) |
260 |
|
|
Spindle |
Spindle Power (Kw) |
3.7/5.5 |
|
Maximum Spindle Speed (rpm) |
20000 |
|
|
Spindle Diameter (mm) |
Φ100 |
|
|
Spindle Tool Change Method |
Pneumatic-Hydraulic Tool Change |
|
|
Tool Holder Type |
BT30 |
|
|
Spindle End Static Runout (5mm from Spindle End Face to Test Bar) (μm) |
≤2 |
|
|
Feed Rate |
Maximum Rapid Traverse Feed Rate (m/min) |
20 |
|
Maximum Cutting Feed Rate (m/min) |
0-10 |
|
|
Machine Precision |
Positioning Accuracy: X/Y/Z (mm) |
0.005/ 0.005 / 0.005 (Φ300) |
|
Repeat Positioning Accuracy: X/Y/Z (mm) |
0.004/ 0.004 / 0.004 |
|
|
Circular Interpolation Accuracy (mm) |
≤0.012/φ200 |
|
|
Spindle Cooling |
Cooling Capacity of Spindle Cooling System (W) |
/ |
|
Lubrication Device |
Lubrication Method |
Automatic Grease Lubrication |
|
Power Source |
Air Compressor Pressure (Mpa) |
≥0.6 |
|
External Vacuum Source Interface |
φ25, Inner Diameter 2m |
|
|
Power Requirement (Kw) |
40 (Maximum)/8 (Average) |
|
|
Tool Magazine |
Tool Magazine Capacity |
21T*3 |
|
Tool Magazine Type |
Chain-Type Servo Tool Magazine |
|
|
Other Parameters |
Overall Dimension (Front-Back * Left-Right * Top-Bottom mm) |
Full Enclosure: 34000 (Including Water Tank) *2500*2745 (Including Three-Color Light) |
|
Weight (Approximate: Kg) |
8500 |
|
|
Equipped with Network Transmission and Monitoring Functions or Not |
Yes |
|
|
Equipped with Tool Setter or Not |
Yes |
Related Products
T-5040-2 Multi-Head Vertical Machining Center
Ideal for machining small plate parts, disc-shaped parts, and shell components in general industries.
3C Industry: Suitable for roughing and finishing processes for mobile phone frames, SIM card trays, hinges, tablet casings, and 5G-related parts such as plates, shells, and box components.
Precision Industries: Suitable for the roughing and finishing of plate, shell, and box components in industries such as instruments, small molds, and medical devices.
T-6050-2 Multi-Head Vertical Machining Center
The T-6050-2 is ideal for the mass production of box-type products, hardware components, and new energy box-type products.
It is also suitable for the mass production of 5G box-type products, valve bodies, and disk-shaped components.